D80官方昨天1月22日下午17时公布新Firmware A/B Update 1.10！
将
下载的文件解压缩，分别得到AD800110.bin、BD800110.bin，分两次对A和B进行升级：
将AD800110.bin拷贝入SD卡根目录，然后打开
相机，选择固件版本，出现提示升级菜单，按OK就行了，等几分钟升级完毕；然后关掉
相机，将AD800110.bin从SD卡根目录删除，将BD800110.bin复制到SD根目录，同上操作，升级完毕！
我的D80已经升级完毕！
我刚开始把两个文件同时拷贝入SD卡根目录，结果只能升级B，升级完毕后从根目录删除BD800110.bin后，才能升级A，不过也无所谓，反正A、B最后都升级了！
升级完成后记得将SD卡根目录BIN文件都删除了！
官方升级说明：
D80 Firmware A/B Update 1.10 for Windows
Instructions before updating your firmware
- This service provides software for upgrading D80 A firmware to Ver. 1.10 and B firmware to Ver. 1.10. When performing this Firmware Upgrade, be sure to upgrade both A and B firmware. Once firmware upgrade is complete, turn the camera off and then on again. If these latest firmware versions are already installed on your D80, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
- Be aware that proper operation of your D80 is not guaranteed if either A or B firmware is upgraded to Ver. 1.10 while the other firmware is not upgraded.
- Be sure to read the section, Modifications enabled with upgrade of A and B firmware from Ver. 1.01 to Ver. 1.10 before upgrading the firmware.
What's New?
Modifications enabled with upgrade of A and B firmware from Ver. 1.01 to Ver. 1.10:
- The product will be “Certified for Windows Vista".
- Support for the new USB Media Transfer Protocol (MTP) has been added. The PTP option in the setup menu's USB item will be modified to MTP/PTP. The icon will also be modified.
- The effects of noise reduction processing performed at shutter speeds of 1 - 8 s with shutter speed set to “bulb”, when On is selected for Long exp. NR in the shooting menu, have been improved.
- Confirming the firmware version:
- Turn the D80 on.
- Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
- Turn the D80 off.
[
本帖最后由 Gemini 于 2008-3-3 01:07 编辑 ]
如果您觉得本帖不错请：投票推荐[0]
